Upgrade your Game Boy Color with the HISPEEDIDO 2.45" Laminated Backlight LCD Kit. Simply install with no soldering required. Enjoy the same size display as the original screen, plus 9 to 1 pixel Integer Scaling, built-in OSD menu and retro pixel effects. Choose from 8 color modes and adjust brightness and image position for the ultimate gaming experience.
FEATURES:
No soldering required.
Same display size as the original screen.
9 to 1 pixel Integer Scaling.
Built-in OSD menu.
Retro pixel effects
15 brightness levels.
8 color modes.
Image position adjustable in the OSD menu.
Shell trimming required.
Glass lens pre-adhered to LCD.
INCLUDED:
1x IPS LCD with laminated lens, PCB with touch sensors, and Ribbon
OSD can be operated with touch sensors (no soldering required) or button presses (requires soldering).
Touch the two touchpads for 5 seconds to active the OSD menu.
Touch the left touchpad to select an option when OSD Menu activated.
Touch the right touchpad to adjust the option when OSD Menu activated.
Shell trimming required on all shells, see install guide.
WARNINGS:
You do not need to purchase a separate lens. Removing pre-adhered lens from LCD can result in damage to the LCD and will void product warranty. If you received an extra lens in your order, this was likely a included plastic lens with a shell and should NOT be placed on top of the pre-adhered lens.
Test before installation! When you receive a backlight/LCD kit, you shouldperform a dry run before installingto assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return.
LCD may breakif put under too much pressure or dropped. Please exercise extreme caution when installing.
Damage to console or LCD may occur if you do not trim the cartridge port pins. Exercise caution when trimming pins, wear eye protection to protect from pin debris when cutting the metal. Damage caused by these pins are not covered under our return or exchange policy. Trim the pins of your Gameboy's cartridge slot flat so that they don't interfere with any parts of the kit. We also recommend placing some Kapton tape over the trimmed pins to prevent any shorts.
Price: $54.73 | Category: restored | Maker: handheldlegend" />
Upgrade your Game Boy Color with the HISPEEDIDO 2.45" Laminated Backlight LCD Kit. Simply install with no soldering required. Enjoy the same size display as the original screen, plus 9 to 1 pixel Integer Scaling, built-in OSD menu and retro pixel effects. Choose from 8 color modes and adjust brightness and image position for the ultimate gaming experience.
FEATURES:
No soldering required.
Same display size as the original screen.
9 to 1 pixel Integer Scaling.
Built-in OSD menu.
Retro pixel effects
15 brightness levels.
8 color modes.
Image position adjustable in the OSD menu.
Shell trimming required.
Glass lens pre-adhered to LCD.
INCLUDED:
1x IPS LCD with laminated lens, PCB with touch sensors, and Ribbon
OSD can be operated with touch sensors (no soldering required) or button presses (requires soldering).
Touch the two touchpads for 5 seconds to active the OSD menu.
Touch the left touchpad to select an option when OSD Menu activated.
Touch the right touchpad to adjust the option when OSD Menu activated.
Shell trimming required on all shells, see install guide.
WARNINGS:
You do not need to purchase a separate lens. Removing pre-adhered lens from LCD can result in damage to the LCD and will void product warranty. If you received an extra lens in your order, this was likely a included plastic lens with a shell and should NOT be placed on top of the pre-adhered lens.
Test before installation! When you receive a backlight/LCD kit, you shouldperform a dry run before installingto assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return.
LCD may breakif put under too much pressure or dropped. Please exercise extreme caution when installing.
Damage to console or LCD may occur if you do not trim the cartridge port pins. Exercise caution when trimming pins, wear eye protection to protect from pin debris when cutting the metal. Damage caused by these pins are not covered under our return or exchange policy. Trim the pins of your Gameboy's cartridge slot flat so that they don't interfere with any parts of the kit. We also recommend placing some Kapton tape over the trimmed pins to prevent any shorts.
Price: $54.73 | Category: restored | Maker: handheldlegend" />
Upgrade your Game Boy Color with the HISPEEDIDO 2.45" Laminated Backlight LCD Kit. Simply install with no soldering required. Enjoy the same size display as the original screen, plus 9 to 1 pixel Integer Scaling, built-in OSD menu and retro pixel effects. Choose from 8 color modes and adjust brightness and image position for the ultimate gaming experience.
FEATURES:
No soldering required.
Same display size as the original screen.
9 to 1 pixel Integer Scaling.
Built-in OSD menu.
Retro pixel effects
15 brightness levels.
8 color modes.
Image position adjustable in the OSD menu.
Shell trimming required.
Glass lens pre-adhered to LCD.
INCLUDED:
1x IPS LCD with laminated lens, PCB with touch sensors, and Ribbon
OSD can be operated with touch sensors (no soldering required) or button presses (requires soldering).
Touch the two touchpads for 5 seconds to active the OSD menu.
Touch the left touchpad to select an option when OSD Menu activated.
Touch the right touchpad to adjust the option when OSD Menu activated.
Shell trimming required on all shells, see install guide.
WARNINGS:
You do not need to purchase a separate lens. Removing pre-adhered lens from LCD can result in damage to the LCD and will void product warranty. If you received an extra lens in your order, this was likely a included plastic lens with a shell and should NOT be placed on top of the pre-adhered lens.
Test before installation! When you receive a backlight/LCD kit, you shouldperform a dry run before installingto assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return.
LCD may breakif put under too much pressure or dropped. Please exercise extreme caution when installing.
Damage to console or LCD may occur if you do not trim the cartridge port pins. Exercise caution when trimming pins, wear eye protection to protect from pin debris when cutting the metal. Damage caused by these pins are not covered under our return or exchange policy. Trim the pins of your Gameboy's cartridge slot flat so that they don't interfere with any parts of the kit. We also recommend placing some Kapton tape over the trimmed pins to prevent any shorts.