These cables are the updated versions currently only compatible with the V2 or V3 and up (White) Cleanscreen PCB Model.
2 Versions; (2 chip) and (1 chip). You may need to check your motherboard to see what version you have. The chips are located on the bottom left of the motherboard.
Only compatible with VA1 (1 chip) and (2 chip) motherboards. To identify which version you will need, please see the install guide at step 6.
The ports on the CleanScreen boards have been updated. The right side port is now longer. Please insert the flex cable on the bottom of the port, fully push in, then secure it.
LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.
Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. However, soldering is required to test the CleanScreen Game Gear mod. You may solder any wires necessary to test for basic functionality of the CleanScreen. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed fully in shells are not eligible for replacement or return.
Price: $10.15 | Category: restored | Maker: handheldlegend" />
These cables are the updated versions currently only compatible with the V2 or V3 and up (White) Cleanscreen PCB Model.
2 Versions; (2 chip) and (1 chip). You may need to check your motherboard to see what version you have. The chips are located on the bottom left of the motherboard.
Only compatible with VA1 (1 chip) and (2 chip) motherboards. To identify which version you will need, please see the install guide at step 6.
The ports on the CleanScreen boards have been updated. The right side port is now longer. Please insert the flex cable on the bottom of the port, fully push in, then secure it.
LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.
Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. However, soldering is required to test the CleanScreen Game Gear mod. You may solder any wires necessary to test for basic functionality of the CleanScreen. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed fully in shells are not eligible for replacement or return.
Price: $10.15 | Category: restored | Maker: handheldlegend" />
These cables are the updated versions currently only compatible with the V2 or V3 and up (White) Cleanscreen PCB Model.
2 Versions; (2 chip) and (1 chip). You may need to check your motherboard to see what version you have. The chips are located on the bottom left of the motherboard.
Only compatible with VA1 (1 chip) and (2 chip) motherboards. To identify which version you will need, please see the install guide at step 6.
The ports on the CleanScreen boards have been updated. The right side port is now longer. Please insert the flex cable on the bottom of the port, fully push in, then secure it.
LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.
Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. However, soldering is required to test the CleanScreen Game Gear mod. You may solder any wires necessary to test for basic functionality of the CleanScreen. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed fully in shells are not eligible for replacement or return.