FEATURES:

• Up to 2 Bluetooth controllers can be paired at once.
• No soldering, trimming or outside cables required.
• Easy firmware update tool that only requires a Bluetooth enabled device like a computer (not compatible with cellphones).
• Configurable button mapping using an application software on a computer.
• Can still use wired SNES Controllers.
  
• Built in LED indicator, makes connecting clearer.

INCLUDED:

• 1x iBlueControlModadapter (battery not included)
  
  

PAIRS WELL WITH:

• ProGCC
• SNES Shells

DOCUMENTATION:

• Flashdrive included with mod that contains instructions.

NOTES:

• Compatible Controllers:
  Support PS3 / PS4 / PS5 / Xbox One S / Xbox Series X|S / Wii / Wii U Pro / Switch Pro/ Switch Joycon Wireless Controllers, etc.
• This item is only compatible with SNES models. Not compatible with Super Famicom models.
• Reset Button Usage:
  The reset button on the console has been converted to offer new functionality based on how long you hold the button down. While it
  is being pressed the front ports will light up to show which state you will be enabling.
  1.Holding for 0-3 seconds will perform the same action as on a stock console, reset.
  In this state all four front port LEDs will be solid on.
  2.Holding for 4-6 seconds will disconnect all connected Bluetooth controllers
  In this state all four front port LEDs will be slowly blinking.
  3.Holding for 7-9 seconds will enable pairing mode
  In this state all four front port LEDs will be blinking faster
  4.Holding for 10 seconds or more will factory reset to the original firmware and remove any custom configs
  In this state all four front port LEDs will be blinking rapidly.
  5.Hold reset button while powering on the iBlueControlMod adapter will be in sleep mode and will not interfere with the console use this in the event that a peripheral is not working nicely with iBlueControlMod..
  

• Please pair the wireless controller first if you have not paired it with this iBlueControlMod before. Power off the SNES console and then power on it again. This will enable the pairing mode, or holding the reset button for 7-9 seconds will also enable pairing mode.

WARNINGS:

• This kit is not the 'BlueRetro mod'. The 'BlueRetro App' cannot be used on this kit. Upgrading to the 'Blue Retro firmware' will damage this product. Refunds will not be given in these instances.

FEATURES:

• Up to 2 Bluetooth controllers can be paired at once.
• No soldering, trimming or outside cables required.
• Easy firmware update tool that only requires a Bluetooth enabled device like a computer (not compatible with cellphones).
• Configurable button mapping using an application software on a computer.
• Can still use wired SNES Controllers.
  
• Built in LED indicator, makes connecting clearer.

INCLUDED:

• 1x iBlueControlModadapter (battery not included)
  
  

PAIRS WELL WITH:

• ProGCC
• SNES Shells

DOCUMENTATION:

• Flashdrive included with mod that contains instructions.

NOTES:

• Compatible Controllers:
  Support PS3 / PS4 / PS5 / Xbox One S / Xbox Series X|S / Wii / Wii U Pro / Switch Pro/ Switch Joycon Wireless Controllers, etc.
• This item is only compatible with SNES models. Not compatible with Super Famicom models.
• Reset Button Usage:
  The reset button on the console has been converted to offer new functionality based on how long you hold the button down. While it
  is being pressed the front ports will light up to show which state you will be enabling.
  1.Holding for 0-3 seconds will perform the same action as on a stock console, reset.
  In this state all four front port LEDs will be solid on.
  2.Holding for 4-6 seconds will disconnect all connected Bluetooth controllers
  In this state all four front port LEDs will be slowly blinking.
  3.Holding for 7-9 seconds will enable pairing mode
  In this state all four front port LEDs will be blinking faster
  4.Holding for 10 seconds or more will factory reset to the original firmware and remove any custom configs
  In this state all four front port LEDs will be blinking rapidly.
  5.Hold reset button while powering on the iBlueControlMod adapter will be in sleep mode and will not interfere with the console use this in the event that a peripheral is not working nicely with iBlueControlMod..
  

• Please pair the wireless controller first if you have not paired it with this iBlueControlMod before. Power off the SNES console and then power on it again. This will enable the pairing mode, or holding the reset button for 7-9 seconds will also enable pairing mode.

WARNINGS:

• This kit is not the 'BlueRetro mod'. The 'BlueRetro App' cannot be used on this kit. Upgrading to the 'Blue Retro firmware' will damage this product. Refunds will not be given in these instances.

FEATURES:

• Up to 2 Bluetooth controllers can be paired at once.
• No soldering, trimming or outside cables required.
• Easy firmware update tool that only requires a Bluetooth enabled device like a computer (not compatible with cellphones).
• Configurable button mapping using an application software on a computer.
• Can still use wired SNES Controllers.
  
• Built in LED indicator, makes connecting clearer.

INCLUDED:

• 1x iBlueControlModadapter (battery not included)
  
  

PAIRS WELL WITH:

• ProGCC
• SNES Shells

DOCUMENTATION:

• Flashdrive included with mod that contains instructions.

NOTES:

• Compatible Controllers:
  Support PS3 / PS4 / PS5 / Xbox One S / Xbox Series X|S / Wii / Wii U Pro / Switch Pro/ Switch Joycon Wireless Controllers, etc.
• This item is only compatible with SNES models. Not compatible with Super Famicom models.
• Reset Button Usage:
  The reset button on the console has been converted to offer new functionality based on how long you hold the button down. While it
  is being pressed the front ports will light up to show which state you will be enabling.
  1.Holding for 0-3 seconds will perform the same action as on a stock console, reset.
  In this state all four front port LEDs will be solid on.
  2.Holding for 4-6 seconds will disconnect all connected Bluetooth controllers
  In this state all four front port LEDs will be slowly blinking.
  3.Holding for 7-9 seconds will enable pairing mode
  In this state all four front port LEDs will be blinking faster
  4.Holding for 10 seconds or more will factory reset to the original firmware and remove any custom configs
  In this state all four front port LEDs will be blinking rapidly.
  5.Hold reset button while powering on the iBlueControlMod adapter will be in sleep mode and will not interfere with the console use this in the event that a peripheral is not working nicely with iBlueControlMod..
  

• Please pair the wireless controller first if you have not paired it with this iBlueControlMod before. Power off the SNES console and then power on it again. This will enable the pairing mode, or holding the reset button for 7-9 seconds will also enable pairing mode.

WARNINGS:

• This kit is not the 'BlueRetro mod'. The 'BlueRetro App' cannot be used on this kit. Upgrading to the 'Blue Retro firmware' will damage this product. Refunds will not be given in these instances.