Unscrew the four bottom Dreamcast screws as shown in the photo.
Remove the top lid and then remove the two power board screws (see photos).
Fit the robot_retro board in exactly the same way as the OEM power board was removed.
Fit 3D printer USBC spacer.
Reassemble the console.
NOTES:
After install if you are having power issues, please check your power supply and USB-C cables. Robot_Retro recommends this wall charger for the best power delivery.
Price: $52.97 | Category: modded | Maker: handheldlegend" />
3D Spacer for Dreamcast Replacement Power Supply USBC Type C Mod
Unscrew the four bottom Dreamcast screws as shown in the photo.
Remove the top lid and then remove the two power board screws (see photos).
Fit the robot_retro board in exactly the same way as the OEM power board was removed.
Fit 3D printer USBC spacer.
Reassemble the console.
NOTES:
After install if you are having power issues, please check your power supply and USB-C cables. Robot_Retro recommends this wall charger for the best power delivery.
Price: $52.97 | Category: modded | Maker: handheldlegend" />
3D Spacer for Dreamcast Replacement Power Supply USBC Type C Mod
Unscrew the four bottom Dreamcast screws as shown in the photo.
Remove the top lid and then remove the two power board screws (see photos).
Fit the robot_retro board in exactly the same way as the OEM power board was removed.
Fit 3D printer USBC spacer.
Reassemble the console.
NOTES:
After install if you are having power issues, please check your power supply and USB-C cables. Robot_Retro recommends this wall charger for the best power delivery.