OSD menu is accessed through pressing in the volume wheel. When you are in the OSD menu, you can select a feature by using up or down on the D-pad. Then use A or B to toggle through the selected features options. Press in volume wheel again to exit menu.
BKLT = Brightness options (10 settings)
VOL = Volume adjustment
DISP = Display modes (X4 = 4x Integer scale, X4P = 4x Integer scale with pixel mode, and FUL= Full Screen (non-integer scale).
CORE = Switch between GB (DMG) and GBC core.
PALT = Color options for GB mode (12 settings)
FRAME MIX = Frame Blending Mode
GBC DISP = Corrects color issues with GB (DMG) games on GBC core.
CLKSPD = Game speed options (7 settings from slow to fast)
Turn off the power switch before installing the LCD panel ribbon.
Make sure to press the battery connector down into the port on the motherboard.
Unable to use AA battery power supply. Only supports lithium battery.
May not support certain flash cartridges.
Clock adjustment due to panel limitation - maximum 1.25 speed.
WARNINGS:
Don't touch the back of the LCD panel against the pin of the cartridge slot when testing. Cover with Kapton tape (see product photos).
Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return.
LCD may breakif put under too much pressure or dropped. Please exercise extreme caution when installing.
Price: $79.46 | Category: repaired | Maker: handheldlegend" />
USB-C Ready Laminated Shell for Game Boy Color - FunnyPlaying
OSD menu is accessed through pressing in the volume wheel. When you are in the OSD menu, you can select a feature by using up or down on the D-pad. Then use A or B to toggle through the selected features options. Press in volume wheel again to exit menu.
BKLT = Brightness options (10 settings)
VOL = Volume adjustment
DISP = Display modes (X4 = 4x Integer scale, X4P = 4x Integer scale with pixel mode, and FUL= Full Screen (non-integer scale).
CORE = Switch between GB (DMG) and GBC core.
PALT = Color options for GB mode (12 settings)
FRAME MIX = Frame Blending Mode
GBC DISP = Corrects color issues with GB (DMG) games on GBC core.
CLKSPD = Game speed options (7 settings from slow to fast)
Turn off the power switch before installing the LCD panel ribbon.
Make sure to press the battery connector down into the port on the motherboard.
Unable to use AA battery power supply. Only supports lithium battery.
May not support certain flash cartridges.
Clock adjustment due to panel limitation - maximum 1.25 speed.
WARNINGS:
Don't touch the back of the LCD panel against the pin of the cartridge slot when testing. Cover with Kapton tape (see product photos).
Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return.
LCD may breakif put under too much pressure or dropped. Please exercise extreme caution when installing.
Price: $79.46 | Category: repaired | Maker: handheldlegend" />
USB-C Ready Laminated Shell for Game Boy Color - FunnyPlaying
OSD menu is accessed through pressing in the volume wheel. When you are in the OSD menu, you can select a feature by using up or down on the D-pad. Then use A or B to toggle through the selected features options. Press in volume wheel again to exit menu.
BKLT = Brightness options (10 settings)
VOL = Volume adjustment
DISP = Display modes (X4 = 4x Integer scale, X4P = 4x Integer scale with pixel mode, and FUL= Full Screen (non-integer scale).
CORE = Switch between GB (DMG) and GBC core.
PALT = Color options for GB mode (12 settings)
FRAME MIX = Frame Blending Mode
GBC DISP = Corrects color issues with GB (DMG) games on GBC core.
CLKSPD = Game speed options (7 settings from slow to fast)
Turn off the power switch before installing the LCD panel ribbon.
Make sure to press the battery connector down into the port on the motherboard.
Unable to use AA battery power supply. Only supports lithium battery.
May not support certain flash cartridges.
Clock adjustment due to panel limitation - maximum 1.25 speed.
WARNINGS:
Don't touch the back of the LCD panel against the pin of the cartridge slot when testing. Cover with Kapton tape (see product photos).
Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return.
LCD may breakif put under too much pressure or dropped. Please exercise extreme caution when installing.