Zarcade Limited, the Zega Mame Gear is a custom-made drop-in kit that fits perfectly into any Sega Game Gear shell without any modification. It runs on a Raspberry Pi 3a+, Zero, Zero 2 and even a CM4 with the optional CM4 adapter, giving you access to thousands of retro games with Retropie. Pre-configured images are available todownload so you can enjoy playing without the hassle of setting it up. Powered using one or two lithium batteries and re-charged via USB-C.
FEATURES:
4 Front button support
Plug and Play
External access to USB and SD Card (Optional)
Connect to a TV with HDMI out (Optional)
Digital Audio
Safe shutdown and power-off
Battery Level Indicator
USB-C Charging
Pre-configured images
Zega Mame Gear with 3.5" Composite LCD
INCLUDED:
1x Mainboard
1x 3.2 inch Serial LCD
1x Digital Audio Board
1x USB-C Powerboard with battery charger, battery level and safe shutdown
1x Speaker
1x 4 wire Mainboard to Power board connector
1x 5 wire Mainboard to Audio board connector
1x Ribbon
1x 3D printed (Resin) Select button pre-soldered to Mainboard
Mame Gear requires a Raspberry Pi with a header. If you have a Pi with a pre-installed header, no soldering required. If not, you will be required to solder the header to the Pi.
Although not required, adding the additional 2 front buttons will open up more games to play on the Zega Mame Gear. Some shell modification is required. You can also purchase a ready drilled shell from the Zega store.
With the optional Zega Mame Gear expansion board, you can easily access the SD card and connect a USB device such as a Game Controller
PCB color may vary. As of 2/7/24 the PCB is black.
Raspberry Pi, shell, buttons, membranes, lens, battery not included.
WARNINGS:
Please ensure you are confident in your soldering ability to attempt this project. Under no circumstances will any refunds/replacements be made if soldering has been attempted.
Price: $70.63 | Category: repaired | Maker: handheldlegend" />
Zarcade Limited, the Zega Mame Gear is a custom-made drop-in kit that fits perfectly into any Sega Game Gear shell without any modification. It runs on a Raspberry Pi 3a+, Zero, Zero 2 and even a CM4 with the optional CM4 adapter, giving you access to thousands of retro games with Retropie. Pre-configured images are available todownload so you can enjoy playing without the hassle of setting it up. Powered using one or two lithium batteries and re-charged via USB-C.
FEATURES:
4 Front button support
Plug and Play
External access to USB and SD Card (Optional)
Connect to a TV with HDMI out (Optional)
Digital Audio
Safe shutdown and power-off
Battery Level Indicator
USB-C Charging
Pre-configured images
Zega Mame Gear with 3.5" Composite LCD
INCLUDED:
1x Mainboard
1x 3.2 inch Serial LCD
1x Digital Audio Board
1x USB-C Powerboard with battery charger, battery level and safe shutdown
1x Speaker
1x 4 wire Mainboard to Power board connector
1x 5 wire Mainboard to Audio board connector
1x Ribbon
1x 3D printed (Resin) Select button pre-soldered to Mainboard
Mame Gear requires a Raspberry Pi with a header. If you have a Pi with a pre-installed header, no soldering required. If not, you will be required to solder the header to the Pi.
Although not required, adding the additional 2 front buttons will open up more games to play on the Zega Mame Gear. Some shell modification is required. You can also purchase a ready drilled shell from the Zega store.
With the optional Zega Mame Gear expansion board, you can easily access the SD card and connect a USB device such as a Game Controller
PCB color may vary. As of 2/7/24 the PCB is black.
Raspberry Pi, shell, buttons, membranes, lens, battery not included.
WARNINGS:
Please ensure you are confident in your soldering ability to attempt this project. Under no circumstances will any refunds/replacements be made if soldering has been attempted.
Price: $70.63 | Category: repaired | Maker: handheldlegend" />
Zarcade Limited, the Zega Mame Gear is a custom-made drop-in kit that fits perfectly into any Sega Game Gear shell without any modification. It runs on a Raspberry Pi 3a+, Zero, Zero 2 and even a CM4 with the optional CM4 adapter, giving you access to thousands of retro games with Retropie. Pre-configured images are available todownload so you can enjoy playing without the hassle of setting it up. Powered using one or two lithium batteries and re-charged via USB-C.
FEATURES:
4 Front button support
Plug and Play
External access to USB and SD Card (Optional)
Connect to a TV with HDMI out (Optional)
Digital Audio
Safe shutdown and power-off
Battery Level Indicator
USB-C Charging
Pre-configured images
Zega Mame Gear with 3.5" Composite LCD
INCLUDED:
1x Mainboard
1x 3.2 inch Serial LCD
1x Digital Audio Board
1x USB-C Powerboard with battery charger, battery level and safe shutdown
1x Speaker
1x 4 wire Mainboard to Power board connector
1x 5 wire Mainboard to Audio board connector
1x Ribbon
1x 3D printed (Resin) Select button pre-soldered to Mainboard
Mame Gear requires a Raspberry Pi with a header. If you have a Pi with a pre-installed header, no soldering required. If not, you will be required to solder the header to the Pi.
Although not required, adding the additional 2 front buttons will open up more games to play on the Zega Mame Gear. Some shell modification is required. You can also purchase a ready drilled shell from the Zega store.
With the optional Zega Mame Gear expansion board, you can easily access the SD card and connect a USB device such as a Game Controller
PCB color may vary. As of 2/7/24 the PCB is black.
Raspberry Pi, shell, buttons, membranes, lens, battery not included.
WARNINGS:
Please ensure you are confident in your soldering ability to attempt this project. Under no circumstances will any refunds/replacements be made if soldering has been attempted.